Application FAQ

Your bachelor studies must satisfy the conditions required by our regulation for admission to the local Master of Science that hosts the EIT Manufacturing programme: Management Engineering for the track "Platforms for Digitalized Value Network" and Mechanical Engineering for the track "Additive Manufacture for Full Flexibility".

The following conditions will make you a very suitable candidate and greatly enhance your chances of being admitted at POLIMI level:

- Make sure you have a competitive academic record. Typically, we recommend for international students a grade point average (GPA) more than 3.4/4 or 4.24/5, that's a B+. The higher the better, obviously. Although GPA score is important, it is not the only element which is evaluated as part of the selection process. The selection committee will review also your CV, your working experience and your letter of motivation.

- Check our country-specific requirements.

Please note that, upon admission at Polimi, the programme coordinator can still specify some constraints on the choice of the elective courses to be included within the first-year study plan, in order to compensate possible lacks in basic prerequisites or to avoid repeating similar courses that you have already taken (personalised study plan).

- If you are a local bachelor student from POLIMI, we suggest that you include in your bachelor study plan all the courses which are conditions for admission to the Laurea Magistrale.

You need to apply directly through the EIT Manufacturing application portal.

For any information and advice, do not hesitate to reach out to us via email: eitmanufacturing@polimi.it

If you finally get accepted in the programme, with POLIMI as your entry university, we'll get in touch with you providing further instructions about your local registration at Polimi.

Local admission and formal enrolment on the Laurea Magistrale will be completed during the Summer (July-September), through the regular admission call for students with Italian bachelor qualification.

If you are completing the Laurea Triennale at Polimi or if you have already obtained your degree, you can ask our office for the documentation of your academic career (confirmation of current enrolment in the last year or degree certificate, and transcript of records) that you need to upload on your EIT Manufacturing application.

Just write an email to eitmanufacturing@polimi.it specifying your person code and ask for the documentation. We warmly invite all our local bachelor students from Polimi to get in touch with us if you need any guidance in the selection of the study trajectory or any advice for a fruitful preparation of your application. Happy to help!

For your local application to Polimi, you will submit your admission request in July-September, using the regular call for students with Italian qualification.

If you are still completing your studies, you need to submit your admission request for the Laurea Magistrale in July-September call, then you will finalise the enrolment after your graduation (in September/October).

If you have a non-Italian bachelor qualification (or if you are currently completing your bachelor’s studies outside Italy), POLIMI's International Admission Office needs to process your local application on the local Online Services, before confirming the results of your EIT application.

If we wait for the end of the EIT selection process, it would be too late for you to apply at POLIMI level. That's why we ask for a "conditional" application to have your documents processed in time at a local level, in case of successful admission to the EIT Manufacturing Master School with POLIMI as entry.

As an EIT Master School candidate, your local application is totally free and it does not bind your final choice. 

Being a conditional application means that your admission to POLIMI is subject to the final admission to the EIT Manufacturing Master School.  If you are finally admitted at EIT level with POLIMI as your entry university, our local Admission Office will get in touch with you just to finalise the last steps for enrolling.

Please, let us know (email at: eitmanufacturing@polimi.it) if you are going to apply for any other Master of Science at POLIMI independently of the results of the EIT selections.

No, as an EIT candidate you don’t have to pay to Polimi the local application fee, nor the administrative fee. As such, your local application is considered valid only for admission to the EIT Manufacturing study tracks and results are subject to final acceptance at the EIT Manufacturing Master School level.

Please go through all the steps of the local application and complete it. Just skip the last step requiring application fee payment. EIT candidates are exempted. Please, ignore any automated reminder that might come from the Online Services regarding your application: your application will be assessed even though on the platform the payment is marked as not completed.

The application fee is due only if you intend to apply to Polimi independently of EIT Manufacturing results or if you are applying also for other local master degrees (that are not executing the EIT Manufacturing Master School programmes) in addition to Management Engineering or Mechanical Engineering, since you are asking to be evaluated as a normal local applicant.

Applicants for Platforms for Digitalized Value Network must choose for the POLIMI application the local master degree course in Management Engineering.

Applicants for Additive Manufacture for Full Flexibility must choose for the POLIMI application the local master degree course in Mechanical Engineering

Applicants for Zero-Defect Manufacture for a Circular Economy must choose for the POLIMI application the local master degree course in Mechanical Engineering

At this stage, you won’t be able to select the specific EIT Manufacturing study tracks when applying locally for Polimi master's degree. If your EIT application is finally accepted, upon enrolment our Student Office will move you to the correct EIT Manufacturing study track.

Here's the list of the required documents for your POLIMI application.

As for the transcript of records, your Bachelor qualification (degree or a proof of current enrolment in the last year), English proof, and Curriculum Vitae, you can use the same files as the ones you uploaded to EIT Manufacturing application portal. Your letter of motivation can be the same as well, or you can tailor it more specifically for POLIMI (it's up to you).

Additional documents (required for completing your POLIMI application)

Only if your bachelor is done outside Italy, you need to upload also a letter of recommendation/reference, written by a current or former professor of your university. In case you have completed your studies a few years ago and it is not possible to get a letter from your former professor, a letter written by your manager or employer may be accepted. You can upload the recommendation letter by your own, together with all the other application documents when submitting your application online, or you can have the letter sent by your referee directly to our local office at POLIMI: eitmanufacturing@polimi.it. Please, let us know if there is any problem with this regard.

Applicants with a bachelor from other universities (in Italy or abroad) must upload also a pdf file with a short but detailed description of main topics covered in your bachelor courses

The description of the courses taken in the bachelor can be downloaded directly from the information systems of your university, otherwise it can be copied from the university course catalogue/syllabus, or may be found in the Diploma Supplement. Please, make a single pdf file and upload it online in your POLIMI application.

The file with the description of courses can be uploaded also later on, if you finally get accepted at Polimi, in order to finalise your admission.

No, the local application process is entirely online.

Congratulation and welcome aboard!!

Make sure you get everything ready for starting your next academic year in Milano, following the admission guidelines at this link: https://www.eitm.polimi.it/admissions/

Our dedicated Student Office will follow up directly with you and will provide guidance on the next steps.

Remember that you need to accept your admission at the EIT Manufacturing level. Looking forward to welcoming you on campus in September!